Home Tech UpdatesComputer Question: Why Does My Computer Keep Going To Bios

Question: Why Does My Computer Keep Going To Bios

by Gilbert R. Brooks

Instead of going to the Windows loading screen, the PC boots directly into the BIOS. This unusual behavior can be due to several reasons: recently changed/added hardware, hardware damage, incorrect hardware connections, and other issues.

How do I boot into Windows instead of BIOS?

Boot to UEFI or BIOS: Boot the PC and press the manufacturer’s key to access the menus. Commonly used keys: Esc, Delete, F1, F2, F10, F11, or F12. Or, if Windows is already installed, from the Sign In screen or Start menu, select Power ( ) > hold down Shift while selecting Restart.BIOS

How do I fix the BIOS loop on my computer?

What to do if the PC is stuck on the BIOS screen? Restore BIOS defaults. Clear the CMOS (BIOS). Use UEFI Boot and check your boot order—repair the computer with Windows 10 bootable media.

Why is my PC stuck in BIOS?

Corrupt BIOS: If your motherboard’s BIOS got corrupted, you could be sure of plenty of challenges while booting, as this PC is stuck with a motherboard screen issue. For example, a failed BIOS update is known to introduce this persistent issue.

How do I exit BIOS mode?

Press the F10 key to exit the BIOS setup utility. Press ENTER to save the changes and leave the Setup Confirmation dialog box.

How do I disable the BIOS at Boot?

Enter the BIOS and look for anything related to enabling, disabling, or displaying the boot screen (wording varies by BIOS version). Set the option to disabled or enabled, whichever is the opposite of how it is currently set.

How do I enter the BIOS on Windows 10?

To enter the BIOS from Windows 10, Click -> Settings or click New notifications. Click Update & Security. Click Recovery and then Restart Now. The Options menu is displayed after performing the above procedures. Select Advanced options. Click UEFI Firmware Settings. Choose Restart. Displays the BIOS setup utility interface.

How do I reset my BIOS to default?

Reset BIOS to Default Settings (BIOS). Enter BIOS Setup Utility. See Accessing BIOS. Press the F9 key to load the factory settings automatically. Confirm the changes by highlighting OK and then pressing Enter. To save the changes and exit the BIOS Setup utility, press F10.

How do I get into the BIOS?

To access the BIOS on a Windows PC, you need to press the BIOS key set by your manufacturer, which can be F10, F2, F12, F1, or DEL. If your PC goes through the self-test Boot too quickly, you can also enter the BIOS through the advanced recovery settings of the Windows 10 start menu.

How do I bypass the UEFI BIOS utility?

Go to UEFI Setup to enable CSM or Legacy BIOS. Press “Del” when the ASUS logo appears on the screen to enter the BIOS. Press “Ctrl-Alt-Del” to reboot the computer if the PC boots to Windows before the installer loads. If this fails, I will reinstall it to avoid future problems.

What do you do if your computer does not start?

What to do if your computer does not start? Give it more Power (Photo: Zlata Ivleva). Check your monitor. (Photo: Zlata Ivleva) Listen to the beep. (Photo: Michael Sexton) Disconnect unnecessary USB devices. Reseat the hardware inside. Explore the BIOS. Scan for viruses using a live CD. Boot into safe mode.

How do I get my computer out of the boot loop?

Unplug and remove the battery, hold the power button for 30 seconds to clear all Power from the circuit, plug it back in and turn it on to see if anything changes.

Can’t get out of the BIOS screen?

If you cannot exit the BIOS on your PC, the problem is most likely caused by your BIOS settings. Enter the BIOS, go to Security Options, and disable Secure Boot. Enter the BIOS again, and go to the boot section. Now save the changes and restart your PC.

How do I change the BIOS settings?

Configuring the BIOS using the BIOS Setup Utility Enter the BIOS Setup Utility by pressing the F2 key while the system performs the power-on self-test (POST). Use the following keyboard keys to navigate the BIOS setup utility: Navigate to the item to be changed. Press Enter to select the item.

How do I get out of the BIOS without saving the changes?

If you confirm, save the changes to the BIOS settings, save the settings to CMOS, and reboot the system. Select this option to exit the BIOS setup without permanently changing the system configuration and restart the computer.

How do I boot in safe mode?

While booting, hold the F8 key before the Windows logo appears. A menu will appear. Use the arrow keys to highlight Safe Mode (or Safe Mode with Networking if you need to use the Internet to solve your problem), then press Enter. You can then release the F8 key.

Can you disable BIOS?

Navigate to the Advanced Settings menu by pressing the left and right arrow keys. Use the up and down arrow keys to highlight the Shadowing and RAM Cacheable settings. Press Enter after highlighting both entries and select the Disabled option—Press Esc and then Y to exit and save the changes.

Is it OK to disable secure Boot?

Secure Boot is an important element of your computer’s security, and disabling it can leave you vulnerable to malware that can take over your PC and make Windows inaccessible.

What is UEFI Boot Mode?

What is UEFI Boot Mode? UEFI boot mode refers to the boot process used by UEFI firmware. During the POST procedure, the UEFI firmware scans all bootable storage devices connected to the system for a valid GUID Partition Table (GPT).

What is the BIOS for Windows 10?

BIOS stands for basic input/output system and controls the behind-the-scenes functions of your laptop, such as pre-boot security options, what the fn key does, and the boot order of your drives. BIOS is plugged into your computer’s motherboard and controls almost everything.

How can I enter the BIOS if the F2 key doesn’t work?

If the F2 prompt does not appear on the screen, you may not know when to press the F2 key. Go to Advanced > Startup > Startup Configuration. In the Boot Display Config pane: Activate the displayed shortcut keys of the POST function. Enable Display F2 to enter Setup. Press F10 to save and exit the BIOS.

Related Posts