Typically, resetting the BIOS will reset the BIOS to the last saved configuration, or reset your BIOS to the BIOS version that came with the PC. Sometimes the latter can cause problems if the settings were changed to account for changes in hardware or operating system after installation.
What happens if you reset the BIOS to defaults?
Resetting your BIOS will restore it to its last saved configuration, so the procedure can also be used to restore your system after making other changes. Whatever situation you are dealing with, remember that resetting your BIOS is an easy procedure for new and experienced users alike.
Do I need to restore the default settings in the BIOS?
Resetting the bios should have no effect or damage your computer in any way. All it does is reset everything to its default value. As for your old CPU holding the frequency to what your old one was, it could be settings, or it could also be a CPU not (fully) supported by your current bios.
Does resetting the BIOS affect Windows?
Clearing the BIOS settings will remove any changes you have made, such as customizing the boot order. But it won’t affect Windows, so don’t worry. When you’re done, make sure to hit the Save and Exit command for your changes to take effect.
What is Load Default Settings in BIOS?
See Accessing BIOS. Press the F9 key to automatically load the factory settings.
Why should you change the default BIOS settings?
Want to change your PC’s boot order or set a password? Here’s how to access and use the BIOS and some common settings changes. Older desktop and laptop computers contain hidden software called the BIOS. Making any changes to this may improve the operation of your computer or interfere with its proper functioning.
How do I reset my BIOS to factory settings?
Resetting from the setup screen Shut down your computer. Turn your computer back on and immediately press the key that opens the BIOS setup screen. Use the arrow keys to navigate the BIOS menu to find the option to reset the computer to default, fallback, or factory settings. Restart your computer.
Does resetting the BIOS delete data?
So when most people are faced with the decision to reset their BIOS, they come across a common question: Does resetting the BIOS erase data? The obvious answer to the question is no. Resetting a computer’s BIOS will not erase data stored on the hard disk drive (HDD) or solid-state drive (SSD).
How do I fix a BIOS problem?
Resolving 0x7B Errors at Startup Shut down and restart your computer. Launch the BIOS or UEFI firmware installer. Change the SATA setting to the correct value. Save the settings and restart the computer. Select Start Windows normally when prompted.
Is clearing CMOS safe?
Clearing the CMOS should always be done for a reason, such as solving a computer problem or clearing a forgotten BIOS password. There is no reason to clear your CMOS if everything is working properly.
Can you reset Windows 10 from the BIOS?
To cover all the bases, there is no way to factory reset Windows from BIOS. Our guide to using the BIOS shows you how to reset your BIOS to its default options, but it won’t factory reset Windows itself.
Which key do you press to enter the BIOS?
To access the BIOS on a Windows PC, you need to press your BIOS key set by your manufacturer, which can be F10, F2, F12, F1, or DEL. If your PC goes through the self-test boot too quickly, you can also enter the BIOS through the advanced recovery settings of the Windows 10 start menu.
Does a factory reset delete everything on a laptop?
Simply factory resetting the operating system will not delete all data, nor will the hard drive be formatted before reinstalling the operating system. To really wipe a drive, users have to use a secure erase software.
How can I reset my BIOS settings to the default with no display?
NEVER reboot your system with the jumper on pins 2-3 NEVER! You must turn off the power. Move the jumper to pins 2-3, wait a few seconds, then move the jumper back to pins 1-2. When you boot up, you can go into the bios and select optimized defaults and from there change whatever settings you need.
What is UEFI mode?
UEFI stands for Unified Extensible Firmware Interface. It does the same job as a BIOS, but with one fundamental difference: it stores all of the initialization and boot data in a . UEFI supports disk sizes up to 9 zettabytes, while BIOS only supports 2.2 terabytes. UEFI provides faster boot time.
What does loading UEFI defaults do?
BIOS/UEFI settings can be used to change the boot order, change keyboard controls, and troubleshoot a computer.
Is it safe to change BIOS settings?
But be careful in your BIOS or UEFI settings screen! You should only change settings if you know what they do. It is possible to make your system unstable or even cause hardware damage by changing certain settings, especially those related to overclocking.
How do I reset my ROG BIOS to defaults?
Enter the BIOS and press F5 for the default setting. Choose Yes and the BIOS will revert to its default value.
How do I reset my UEFI BIOS?
How do I reset my BIOS/UEFI to default settings? Press and hold the power button for 10 seconds, or until your system is completely turned off. Turn on the system. Press F9 and then Enter to load the default configuration. Press F10 and then Enter to save and exit.
How do I remove a BIOS password?
On the computer motherboard, locate the BIOS clear or password jumper or DIP switch and change its position. This jumper is often labeled CLEAR, CLEAR CMOS, JCMOS1, CLR, CLRPWD, PASSWD, PASSWORD, PSWD, or PWD. To clear, remove the jumper from the two pins currently covered and place it over the two remaining jumpers.
How do I reset my computer to factory settings using Command Prompt?
Method 1: Run the Windows 10 reset step by step from the command line Open an elevated Command Prompt. In the command prompt window, type “systemreset –factoryreset” (without quotes). Then select “Keep my files” or “Delete everything” to reset your PC, depending on whether you want to keep your personal files.
